Description
The inside mounted frizzen screw on a J. Kibler’s Colonial flintlock, used on the Colonial, Woodsrunner, and Fowler models, requires a longer frizzen screw with a nut to mount a flash guard. Installation of an iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. To install this screw. Dismount the lock from the gun. Use a mainspring vise to gently compress the frizzen spring only enough to remove tension on the frizzen. Remove the frizzen screw using a well fitted screw driver. Install the flashguard screw. Place your flash guard over the threaded end of the screw. Install the nut. The nut is designed to be a tight fit on the male threads, it will be snug as it goes on. Use a wrench, a percussion nipple wrench also works well to drive the nut. The nut has a small shoulder that will center the mounting screw hole on the flash guard. Tighten it down snug. We offer a number of different flash guards. Available unmarked, with a French “Fleur-de-Lis” cartouche , or the English “Crown” mark over the letters “GR” for “Georgus Rex” (George the King).A Colonial flintlock, shown with a unmarked brass flashguard FLASH-GD-UN-B installed. This is the screw and nut only, lock and flashguard not included.
